RADIOTHRAPY MASK

2 CLAMPS CHEST MASK

For most types of radiotherapy to your chest area, you wear a mask during each treatment. . The mask is made to hold your chest still and in exactly the right position. This helps make your treatment as accurate and effective as possible.

Previous Next

1 2 3 4 5 6 7 8 9 10

Repeated Plasticity

No deformation After Cooling

Very Good Tensile, You Can Stretch It Freely

Good Quality

Good Breathability

High Strength

Good Memory Function

Avirulent And Insipidity

No Stimulation To The Skin

Biodegradable

Light weight, easy to carry

The weight is only about 1/8 of the normal medical plaster, wearing comfortable and neat appearance.

Strong Plasticity

Once put it into 65℃~75℃ water for 3~5 minutes, it will be soften and easily shaped in any shape according to the patients’ affected positions. And it will not rebound after cooling, thus realize the real private order system ONE PERSON ONE DESIGN.

Very good tensile, you can stretch it freely.

Once activated, it can be stretched to 5-7 times as its original .

100% of the memory function

If the materials can not closely fit to the patients’ affected position, then put it back into the water and reshaped. It will be quickly recovered to its original state, this can reduce the costs and avoid wasting.

Green Environmental

After 1 year, it can be degraded by itself in natural conditions.

Specifications

Model

Operation Instructions

1. Select the applicable positioning mask for head, head neck shoulder or body Mask.

2. Put the mask into the water with constant temperature of 149℉-167℉/65-75℃ for 2-3 minutes when the mask changed to transparent and soften. Please take it out and put it on the operation table, dry it with a piece of soft cloth. Put the mask on the suitable fixing part to shape it and fix it on the adapter board.

3 After 2-4 minutes when the mask is in a certain strength, draw the mark line and take it out for the future use.

Cautions

1. When you are heating the material in hot water with about 65-75℃, the water must below 176℉(80℃) be sure to maintain the appropriate time, neither too long nor too short, in general, it is enough to make it soften and activated about 2-3min.

2. After the positioning mask was soften, it could be operated within 2-3 minutes in room temperature surrounding. The surrounding temperature would affect the level of hardening.

3. It is important that the thermoplastic is completely cool before removing it from patient, if remove it when still warm, it will cause additional shrinkage and will be very tight in the patient. A cool, damp towel can help speed the cooling process.

4. Be careful with using.

5. Thermoplastic material with engineered limited shrinkage. Remold a mask when the patient’s volume has increased or decreased.

Certification

error: Content is protected !!

Size	Weight
2284602.4	254 g

RADIOTHRAPY MASK

For most types of radiotherapy to your chest area, you wear a mask during each treatment. . The mask is made to hold your chest still and in exactly the right position. This helps make your treatment as accurate and effective as possible.

Repeated Plasticity

No deformation After Cooling

Very Good Tensile, You Can Stretch It Freely

Good Quality

Good Breathability

High Strength

Good Memory Function

Avirulent And Insipidity

No Stimulation To The Skin

Biodegradable

Light weight, easy to carry

Strong Plasticity

Very good tensile, you can stretch it freely.

100% of the memory function

Green Environmental

Specifications

Size

Weight

Opening Hours

Contact Us

Related Links